Everything Else - How to Use Table Top Epoxy for a Crystal-Clear Finish

Achieving a flawless, crystal-clear finish with table top epoxy is easier than you think—if you follow the right steps. Whether you're coating a wooden slab, creating a resin table top, or refreshing an old surface, proper preparation and application are key to a glass-like result.

Start by ensuring your surface is clean, dry, and level. Sand down any imperfections and wipe away dust and debris. If you’re working with porous materials like wood, sealing the surface with a thin layer of table top epoxy resin helps prevent air bubbles from rising during the main pour.

Next, mix your table top epoxy according to the manufacturer's instructions. Most formulas require a 1:1 ratio of resin and hardener. Stir slowly for 3–5 minutes, scraping the sides and bottom of the container to ensure a complete mix. Avoid whipping air into the mixture—this helps reduce bubbles later.

Once mixed, pour the epoxy evenly across your surface. Use a notched trowel or plastic spreader to distribute it, allowing it to self-level. A heat gun or torch can be used to gently remove surface bubbles within the first 10–15 minutes after pouring. Be sure to move the heat source continuously to avoid scorching the epoxy.

Let the resin table top cure in a dust-free environment, protected from humidity and temperature fluctuations. Most table top epoxy resin products will harden within 12–24 hours, but full curing may take several days. Don’t disturb the surface while it cures—any dust or movement can disrupt the crystal-clear finish you worked hard to achieve.

Once cured, lightly sand and polish for added shine, or apply a second coat if desired. The result? A smooth, glass-like finish that enhances the natural beauty of your material while providing lasting durability.
For professional results, consider using MB Epoxy—a trusted name in the epoxy resin world known for its clarity, strength, and ease of use.